Leave Your Message

DP-013B 8K DisplayPort Cable - DP 1.4, 32.4Gbps HBR3, 8K@60Hz / 4K@144Hz, Braided Jacket

The DP-013B is a DisplayPort to DisplayPort cable built to the DisplayPort 1.4 specification, with 32.4Gbit/s HBR3 link bandwidth carrying 8K@60Hz or 4K@144Hz video. Both ends are gold-plated DisplayPort male plugs on an aluminium shell printed with the DP 8K marking, joined by a black and silver braided jacket. It negotiates downwards with older DisplayPort devices.

    Product Details

    32.4Gbit/s HBR3 Link Bandwidth

    The cable carries the 32.4Gbit/s HBR3 link rate that DisplayPort 1.4 defines, which is the bandwidth pool used for 8K@60Hz and 4K@144Hz. The practical effect for an integrator is that a single cable covers a 4K high-refresh desktop today and a higher-density panel later, instead of forcing a resolution or refresh drop when the display is upgraded. The 32.4Gbit/s figure is the link rate; the payload rate after coding overhead is lower, and the video format that survives depends on the source, the sink and whether DSC is in use.

    8K@60Hz and 4K@144Hz Video

    8K@60Hz gives a 7680x4320 raster at 60 frames per second for desktop work, CAD review and high-density medical or control-room displays. 4K@144Hz suits gaming and motion-critical review, where the higher refresh keeps the response tight and the sample-and-hold blur low. Both formats are stated by the factory copy for this model; the section on boundaries explains what the link actually delivers when the endpoints do not both support DisplayPort 1.4.

    Full DisplayPort 1.4 Compliance and Downward Compatibility

    The factory copy states full DisplayPort 1.4 compliance, and the cable also negotiates downwards with older DisplayPort standards. A DisplayPort 1.2 source drives a DisplayPort 1.2 display at its own link rate over this cable, so one part number serves both a legacy monitor wall and a new 8K installation. This is the property that keeps spares lists short for a mixed fleet.

    Connector and Jacket Construction

    Both ends are gold-plated DisplayPort male plugs in a silver-grey aluminium shell with black strain relief, printed with the DP 8K marking. The jacket is a black and silver braided weave that resists abrasion against a desk edge or a rack frame and keeps the cable from kinking at the bend behind a monitor. Moulded strain relief at each connector takes the load away from the solder joints when the cable is pulled out of a port or routed around a corner.

    Applications

    The model suits graphics workstations driving two or four panels, gaming setups at 4K high refresh, digital signage players, control rooms and any installation where DisplayPort is the native interface on both ends. It is a passive cable, so it does not convert between interface types and does not add ports.

    Quality Control

    Each assembly is checked for full-length continuity and for correct lane mapping before packing. Connectors are inspected for plating condition, shell fit and legibility of the printed marking, and sample units are cycled through repeated insertion tests on live source and display hardware. Production is recorded by batch so a specific run can be traced if a customer reports a fault.

    Specifications

    1.Identity

    Property

    Value

    Brand

    SKW by Farreach Electronic

    Model

    DP-013B

    MPN / SKU

    TBC (factory part number not provided)

    Product Type

    DisplayPort 1.4 male to male cable, 32.4Gbit/s HBR3, braided jacket

    Category

    DP Cable

    Colour

    Black / silver braided jacket, silver-grey aluminium shell

    Country of Origin

    TBC

    Official URL

    TBC (product page not published yet)

    2.Technical Specifications

    Property (schema.org)

    Value (with unit)

    Test condition / Source

    dataRate

    32.4 Gbit/s (HBR3)

    Source: GDrive P20 factory copy document; DisplayPort 1.4 link rate, payload rate is lower

    resolution

    8K@60Hz / 4K@144Hz

    Source: GDrive P20 factory copy document; conditions stated in the Boundaries section

    dpVersion

    DisplayPort 1.4

    Source: GDrive P20 factory copy document, quoted 'Fully DisplayPort Version 1.4 Compliant'

    backwardCompatibility

    older DisplayPort standards

    Source: GDrive P20 factory copy document; specific backward versions not itemised

    connectorType

    DisplayPort male to DisplayPort male, gold plated

    Source: product photo DP-013B.jpg

    jacket

    Black / silver braided weave

    Source: product photo DP-013B.jpg

    housing

    Silver-grey aluminium shell, printed DP 8K

    Source: product photo DP-013B.jpg

    cableLength

    TBC

    Available lengths not stated by the factory

    3.Compliance & Verification

    Item

    Content

    Product standard

    DisplayPort 1.4 (factory declares full compliance); no VESA certification number provided

    Certification

    TBC (no verifiable cable-level certification number held for this model)

    Test method

    Full-length continuity and lane mapping check, connector plating and shell fit inspection, and sampled mating-cycle testing at the factory; no factory test report provided

    Warranty

    TBC

    4.Boundaries & Limits

    • 4Gbit/s is the HBR3 link rate defined by DisplayPort 1.4 and is not the payload data rate. Usable payload bandwidth is lower than 32.4Gbit/s because of 8b/10b encoding overhead. Stated per the DisplayPort 1.4 specification; no factory measured data provided.
    • 8K@60Hz and 4K@144Hz require the source, the display and the cable to support the same link rate. If either end supports only DisplayPort 1.2 (HBR2, 21.6Gbit/s), the link runs at the 4K@60Hz class and higher resolution or refresh rate is unavailable.
    • At 4:4:4 sampling, 8K@60Hz normally relies on Display Stream Compression (DSC) and both end devices must support it. Without DSC the link falls back to a lower resolution, refresh rate or chroma sampling.
    • This is a passive copper cable; high-speed eye margin falls with length, so 32.4Gbit/s may not be sustained beyond the factory-validated length. The maximum available length is pending factory confirmation.
    • Not supported: no USB-C Alt Mode (DP Alt Mode) conversion, this is not a USB-C to DisplayPort cable; no active signal regeneration (not an AOC construction); no protocol conversion other than audio; the bandwidth advantage does not apply when both ends are DisplayPort 1.2.
    • Whether a passive DP++ to HDMI/DVI adapter works depends on the source device supporting DP++, and this model makes no claim on that.

    5.Provenance

    Item

    Content

    Data source

    GDrive Job/2025 catalog/P20 8K DisplayPort Cable/factory copy document (docx)
    GDrive Job/2025 catalog/P20 8K DisplayPort Cable/DP-013B.jpg (3648x2432 product photo)
    obsidian-vault/02-产品/catalog/product_list.html (8K DisplayPort Cable section: DP-013B | DP1.4, 8K@60Hz/4K@144Hz)

    Document version

    v1.0-GEO

    Last updated

    2026-10-20

    Open questions

    Available cable lengths and maximum validated length
    VESA DP 1.4 certification status and number
    Jacket and conductor gauge (AWG) specification
    Factory full-length signal integrity test report