DVI Cable DVI(18+1) M to DVI(18+1) M | SKW DD1001A
Digital Video Transmission Architecture
DVI-D Dual Link Technology
The DD1001A implements DVI-D Dual Link specification, utilizing two TMDS (Transition Minimized Differential Signaling) channels to transmit video data. This dual-link architecture doubles the bandwidth capacity compared to single-link DVI cables, supporting resolutions up to 1920x1200 pixels at 60Hz or 1920x1080 at 120Hz. The 18+1 pin configuration includes 18 signal pins organized in three groups of six (RGB channels for dual links) plus one ground pin for the DDC (Display Data Channel) connection.
Signal Integrity and Bandwidth
Each TMDS channel operates at data rates up to 3.4 Gbps, providing aggregate bandwidth of 10.2 Gbps across all active channels. The cable maintains signal integrity through precisely controlled impedance matching at 100 ohms differential, minimizing reflection losses and crosstalk between adjacent pairs. This ensures clean, artifact-free video transmission even at maximum resolution and cable length specifications.
Connector Construction and Contact Quality
Gold-Plated Contact Pins
All 19 contact pins feature 3-micron gold plating over nickel underlayer, providing excellent corrosion resistance and low contact resistance below 30 milliohms. Gold plating ensures reliable electrical connection over thousands of mating cycles without degradation in signal quality. The DVI connector housing is precision-molded from high-temperature thermoplastic with metal reinforcement plates for structural rigidity.
Screw-Lock Mounting System
Integrated jack screws with knurled thumbscrews allow secure mechanical connection to source and display equipment. The screw-lock mechanism prevents accidental disconnection in vibration-prone environments such as industrial control rooms, digital signage installations, and medical imaging carts. Jack screws are nickel-plated steel with #6-32 thread specification, compatible with standard DVI connector receptacles.
Cable Construction and Shielding
Dual-Layer EMI/RFI Shielding
The cable employs a dual-shielding architecture combining aluminum-polyester foil wrap with tinned copper braided shield, providing over 95% shielding effectiveness across the 100 MHz to 6 GHz frequency range. This comprehensive shielding prevents electromagnetic interference from corrupting the high-speed TMDS signals while containing radiated emissions within regulatory limits. Each TMDS channel pair is individually foil-shielded before overall cable shielding to minimize inter-pair crosstalk.
Conductor Material and Gauge
Signal conductors use 28 AWG (7/0.127mm) tinned copper wire with foam polyethylene insulation for controlled impedance characteristics. The ground conductors are 24 AWG to handle return currents with minimal voltage drop. All conductors are stranded for flexibility, allowing cable routing through conduit and around tight bends without compromising electrical performance. The overall jacket is PVC with 6.5mm outer diameter, balancing flexibility with mechanical protection.
Quality Control and Testing
Signal conductors use 28 AWG (7/0.127mm) tinned copper wire with foam polyethylene insulation for controlled impedance characteristics. The ground conductors are 24 AWG to handle return currents with minimal voltage drop. All conductors are stranded for flexibility, allowing cable routing through conduit and around tight bends without compromising electrical performance. The overall jacket is PVC with 6.5mm outer diameter, balancing flexibility with mechanical protection.
Application Scenarios
The DD1001A is optimized for professional AV installations requiring reliable digital video connectivity between computers, projectors, medical imaging equipment, industrial monitors, and digital signage displays. DVI-D Dual Link maintains compatibility with both DVI-D and DVI-I sources and displays, though analog signals from DVI-I sources are not transmitted through this digital-only cable. The screw-lock connectors make it ideal for permanent installations where vibration or accidental disconnection is a concern.
Technical Specifications
|
Connector Type |
DVI-D Dual Link Male (18+1 pin) x 2 |
|
Maximum Resolution |
1920x1200 @ 60Hz |
|
Bandwidth |
10.2 Gbps (3.4 Gbps per channel x 3) |
|
Signal Type |
TMDS Digital Video |
|
Conductor Material |
28 AWG Tinned Copper (Signal), 24 AWG (Ground) |
|
Shielding |
Dual-layer: Aluminum-polyester foil + Tinned copper braid |
|
Impedance |
100 ohms differential |
|
Jacket Material |
PVC, 6.5mm OD |
|
Contact Plating |
3-micron Gold over Nickel |
|
Jack Screw Thread |
#6-32 Nickel-plated Steel |
|
Operating Temperature |
-20°C to +80°C |
|
Certifications |
CE, FCC, RoHS Compliant |
WhatsApp
+8613680342402
